GLASS INSTALLATION & CUSTOM GLASS WORKS · DUBAI
Glass Installation & Custom Glass Works in Dubai
Toughened and laminated glass partitions, doors, mirrors, shelves and display cabinets, measured on site, made to order and installed by one Dubai fit-out team. Clean edges, secure fixings and a finish that lasts.
Toughened and laminated safety glass · Frameless and framed systems · SS304 and marine-grade SS316 hardware · Free site survey across Dubai
OVERVIEW
Glass Made, Measured and Fitted by One Dubai Team
Glass installation services in Dubai cover far more than fitting a pane into a frame. Glass partitions divide offices and homes, frameless doors open a hallway to light, mirrors enlarge a room, shelves and display cabinets show off what you own, and every one of them has to be made to the millimetre, from the right type of safety glass, and fixed to a structure that can carry it. Vision Three designs, fabricates and installs glass and custom glass works for villas, apartments, offices, retail units and hotels across Dubai.
The difference between a good glass job and a regretful one is rarely the glass itself. It is the survey, the choice between toughened and laminated, the thickness for the span, the hardware that carries the weight and the silicone that seals the joint. Glass cannot be trimmed, drilled or reshaped once it has been toughened, so every dimension, hole and cut-out must be right before fabrication begins. We measure on site after the floor and wall finishes are in, confirm the specification on a written drawing, and install with our own team so there is one point of responsibility from survey to handover.
We have renovated and fitted out interiors in Dubai since 2008, so glass is planned alongside the rest of the room: the tiling, the joinery, the lighting and the ceiling. This page explains the glass services we offer, the types of glass and when to use each, real AED price ranges, mistakes to avoid and how a project runs. For wet areas, see our specialist shower glass and bathroom enclosures and bathroom mirror installation pages.
Measured after finishes
Final measurements are taken on completed floors and walls, with a laser level, so glass fits first time.
Right glass for the job
We specify toughened, laminated or low-iron glass by use, span and safety need, not by habit.
Hardware rated to the load
Hinges, patch fittings, channels and brackets are chosen from the real glass weight.
One team, one itemised quote
Survey, drawings, fabrication, installation and sealing on a single written quotation with no extras on the day.
OUR GLASS SERVICES
Glass Installation and Custom Glass Works We Offer in Dubai
Choose the service closest to your project. Each of our glass installation services in Dubai has its own page with sizing, hardware, pricing and process in detail.
Custom Glass Works
Made-to-order glass to your drawings: shaped panels, cut-outs, special finishes and one-off designs.
Glass Partition Installation
Fixed and framed glass partitions for offices, homes, kitchens and retail, in 8–12mm toughened glass.
Frameless Glass Partitions
Minimal-hardware partitions in 10–12mm glass with clamps and channels for a seamless, open look.
Glass Door Installation
Hinged, pivot and sliding glass doors with floor springs, patch fittings and rated hardware.
Frameless Glass Doors
Heavy 10–12mm frameless doors with patch fittings, closers and locks for entrances and offices.
Tempered Glass Installation
Toughened safety glass cut, heat-treated and fitted for doors, partitions, balustrades and tabletops.
Laminated Glass Installation
Two or more layers bonded with an interlayer for safety, security, sound control and overhead glazing.
Custom Mirrors
Plain, bevelled, shaped, LED and full-height mirrors cut and fitted for homes, gyms and retail.
Decorative Glass & Mirror Walls
Fluted, frosted, tinted and bronze glass, plus full mirror walls for feature walls and entrances.
Glass Shelves Installation
Toughened glass shelves with polished edges and concealed or visible brackets, for homes and shops.
Glass Display Cabinets
Made-to-measure display and vitrine cabinets with glass doors, shelves and optional lighting.
Shower Glass & Enclosures
Frameless showers, sliding doors, walk-in screens and custom enclosures for bathrooms.
Not sure which glass service you need?
Send us a photo and rough dimensions on WhatsApp. We will tell you which glass, thickness and fixing suits the space, and give you an itemised quote after a free site survey.
WHY VISION THREE
Why Dubai Clients Choose Us for Glass Works
Surveyed and drawn first
You approve a dimensioned drawing before any glass is cut, because toughened glass cannot be changed afterwards.
Measured after finishes
We take final measurements once floors, walls and ceilings are complete, so there are no gaps to hide.
Specification by use
Toughened for most doors and partitions, laminated where safety, security or overhead use demands it.
Hardware that carries the weight
Fittings are rated to the glass weight and finished to match your project, in SS304 or marine-grade SS316.
A fit-out team behind the glass
We coordinate glass with false ceilings, carpentry and MEP work so every trade lines up.
Plain-English quotations
Glass, thickness, edge, hardware, installation and any removal are itemised, so you can compare quotes like for like.
HOW IT WORKS
Our 5-Step Glass Installation Process
1
Free Site Survey
We measure with a laser level, check walls, floors and ceilings for plumb and level, and discuss use, privacy, light and safety.
2
Design, Drawing & Quote
You choose glass type, thickness, edge, finish and hardware. We issue a dimensioned drawing and an itemised quotation, usually within 24 to 48 hours.
3
Final Measure & Fabrication
Glass is cut, edge-polished, drilled, notched and toughened or laminated to the approved drawing. Typically 5 to 10 working days, longer for custom work.
4
Installation
We fix channels, brackets and hardware, set the glass, level and align every panel and check door action and clearances.
5
Seal, Test & Handover
Joints are sealed with sanitary or structural silicone, cleaned and left to cure. We check every panel and show you the cleaning routine.
GLASS TYPES GUIDE
Which Type of Glass Should You Use?
The right glass depends on where it goes and what it must do. The guide below is our usual starting point, and we confirm every choice on site. Our dedicated pages cover tempered glass installation and laminated glass installation in detail.
| Glass type | How it is made | Typically used for | Usual thickness |
|---|---|---|---|
| Toughened (tempered) | Heat-treated for about four to five times the strength of ordinary glass; breaks into small blunt pieces | Doors, partitions, shelves, tabletops, shower screens | 8mm, 10mm, 12mm |
| Laminated | Two or more glass layers bonded with an interlayer that holds the glass together if broken | Overhead glazing, balustrades, security and sound control | 6.38mm to 21.52mm |
| Clear annealed | Standard float glass; breaks into large sharp pieces and is not a safety glass on its own | Mirrors, picture glass and protected, non-impact areas | 4mm to 6mm |
| Low-iron (ultra-clear) | Float glass with less iron, so edges look clear instead of green | Feature partitions, shelves, display cabinets | 8mm to 12mm |
| Decorative (fluted, frosted, tinted) | Surface-treated or coloured glass for privacy and style | Privacy partitions, feature walls, doors | 6mm to 12mm |
← Swipe to see full table →
Safety glass should meet recognised standards, such as EN 12150 for toughened glass and EN 14449 for laminated glass, and carry a visible mark. Where a building has its own glazing rules, we confirm the requirement with your building management before ordering.
THICKNESS, HARDWARE & FINISHES
Choosing Glass Thickness, Hardware and Finishes
Thickness, fittings and finish decide how a glass installation looks, feels and ages. These are the six decisions we help you make on every project.
8mm toughened
Shelves, smaller partitions, framed doors and display cabinets. Strong and cost-efficient.
10mm toughened
Our default for frameless partitions and doors of standard height. A solid, reassuring feel.
12mm toughened
Tall or wide partitions, heavy frameless doors and entrance glazing. The most substantial option.
Floor springs & patch fittings
Concealed floor springs and patch fittings carry heavy frameless doors and give smooth, controlled closing.
Channels, clamps & brackets
Slim floor and ceiling channels, spigots and clamps hold partitions with almost no visible metal.
Finishes & hardware colours
Polished chrome, brushed nickel, matte black, brushed gold and gunmetal, matched across the whole project.
Glass weighs about 2.5kg per square metre for every millimetre of thickness, so a 2.4m by 1m panel in 12mm glass weighs around 72kg. That is why fixings, floors and ceilings are checked before we order. We specify SS304 stainless steel as standard and marine-grade SS316 for coastal properties on Palm Jumeirah, Dubai Marina, JBR, Emaar Beachfront and Bluewaters Island, where salt-laden air can pit lower-grade fittings. Low-iron glass removes the green edge tint and typically adds 20 to 30 percent to the glass cost.
WHERE WE WORK
Glass Installation for Villas, Apartments, Offices and Retail
Villas
Frameless doors, partitions, mirrors and feature glass for living areas and staircases in Emirates Hills, Arabian Ranches and Dubai Hills Estate, often within a villa renovation.
Apartments
Partitions, mirror walls, shelves and doors that open up compact layouts in Downtown, JLT, Business Bay and Dubai Marina. See our apartment renovation work.
Offices & commercial
Glass partitions, meeting rooms and entrance doors that bring in light and keep sound controlled, fitted around your working schedule.
Retail, hotels & hospitality
Display cabinets, shelves, mirror walls and decorative glass for shops, restaurants and hotel interiors.
PROBLEMS WE SOLVE
Common Glass Problems in Dubai Properties
Doors dropping or not closing
Worn hinges, floor springs or patch fittings. We re-set or replace the hardware and re-align the door.
Glass that does not fit the opening
Ordered before finishes or from rough measurements. We re-template and re-make the glass to the real opening.
Black edges on mirrors
Moisture reaching the backing. We replace with moisture-resistant mirror and seal the edges.
Cracked or chipped glass
Toughened glass cannot be repaired once damaged. We template, re-make and replace the panel.
Poor sound and privacy in glass offices
Single-glazed partitions that let noise through. We upgrade to laminated glass, seals or frosted finishes.
Failed or discoloured silicone
Old silicone that has hardened or grown mould. We cut it out completely, clean the joint and re-seal.
COST GUIDE 2026
How Much Does Glass Installation Cost in Dubai?
Supplied and installed, glass installation services in Dubai typically cost from about AED 150 for a single glass shelf and AED 250 for a small mirror, to AED 1,800 or more for a glass door, and from roughly AED 450 to AED 900 per square metre for toughened glass partitions in 10mm to 12mm glass. Large custom schemes, laminated glazing and feature mirror walls are quoted from drawings.
Price follows six things: the glass area in square metres, the type and thickness, clear versus low-iron or decorative glass, the amount of shaping, drilling and cut-outs, the quality of the hardware, and the access and working hours on site. Laminated glass costs more than toughened of the same thickness, and frameless systems cost more than framed ones.
Our quotes include survey, drawings, fabrication, delivery, installation, sealing and removal of packaging. Removal of existing glass or frames is quoted separately, and out-of-hours working in occupied buildings is itemised.
ESSENTIAL
AED 150 – 1,800
Glass shelves, mirrors, tabletops and small fixed panels in 6–10mm glass with polished edges and standard hardware.
SIGNATURE
AED 1,800 – 8,000
Glass doors, partitions and display cabinets in 10–12mm toughened glass with quality hardware and a precise finish.
BESPOKE
AED 8,000 – 30,000+
Large frameless partitions, laminated or low-iron glazing, mirror walls and decorative schemes with premium hardware.
Add-ons: easy-clean coating AED 250–600 · low-iron upgrade +20–30% · frosted or fluted glass +15–35% · laminated upgrade quoted by thickness · premium hardware finish +AED 300–900. Indicative 2026 prices, supplied and installed; your exact figure follows a free site survey.
TIMELINE
How Long Does Glass Installation Take?
Same day
SURVEY
24–48 hrs
DRAWING & QUOTE
5–10 days
FABRICATION
1–3 days
INSTALLATION
24 hrs
SILICONE CURE
Glass installation services in Dubai typically take 7 to 21 days from first visit to a finished installation, depending on scope. Shelves, mirrors and single doors are at the quick end, while large partition schemes, laminated glazing and custom shapes take longer. If glass is part of a renovation, we book the final measure for after finishes are complete so panels arrive when the space is ready.
COMPARE
Tempered vs Laminated vs Annealed Glass
What is the difference between tempered and laminated glass? Tempered (toughened) glass is heat-treated to be about four to five times stronger than ordinary glass and breaks into small blunt pieces, while laminated glass bonds layers with an interlayer so the glass stays in place when it cracks. Tempered suits most doors and partitions; laminated suits overhead, security and sound-control uses. Read more on our tempered glass and laminated glass pages.
| Feature | Tempered (toughened) | Laminated | Annealed |
|---|---|---|---|
| Strength | About 4–5× annealed glass | Similar to base glass, but stays in place when cracked | Standard, lowest |
| When it breaks | Small blunt granules | Cracks but holds together | Large sharp shards |
| Can it be cut after making? | No | No, once laminated | Yes, before toughening |
| Sound and security | Moderate | Better, with a thicker interlayer | Low |
| Best for | Doors, partitions, shelves, tabletops | Overhead glass, balustrades, security glazing | Mirrors and protected glass |
| Relative cost | Medium | Higher | Lowest |
← Swipe to see full comparison →
AVOID COSTLY ERRORS
6 Glass Installation Mistakes We See in Dubai
1. Ordering glass before finishes are done. Floors, tiles and wall finishes change the opening by 10 to 30mm. Glass ordered early often cannot be used, and cannot be altered once toughened.
2. Using the wrong type of glass. Annealed glass in a door or partition is a safety risk. Overhead or balustrade glass should normally be laminated. Specify glass by use, not price.
3. Underestimating the weight. A 12mm panel weighs about 30kg per square metre. Weak walls, hollow floors and light ceilings need checking and strengthening before installation.
4. Choosing the cheapest hardware. Low-grade hinges, springs and clamps sag, rust and fail. Hardware is the part you use every day, so it is where quality matters most.
5. Skipping the drawing approval. Every hole, notch and corner must be on an approved drawing, because toughened glass cannot be drilled or trimmed afterwards.
6. Ignoring sealing, ventilation and cleaning. Poorly sealed glass leaks, traps dirt and discolours. Plan the joints, and choose finishes you can keep clean.
QUICK CHECKLIST
✓ Site survey completed with laser measurements
✓ Dimensioned drawing approved before fabrication
✓ Glass type matched to use (toughened or laminated)
✓ Thickness suited to span and height
✓ Walls, floor and ceiling checked for the load
✓ Hardware rated to the glass weight
✓ Final measure taken after finishes
✓ Safety mark visible on every panel
✓ Silicone and sealing specified
✓ Cleaning routine explained at handover
AFTERCARE
Keeping Your Glass Clear, Secure and Long-Lasting
Clean with a soft cloth
Use a microfibre cloth and a mild non-abrasive glass cleaner. Avoid scrapers and harsh chemicals that scratch or damage coatings.
Wipe edges and channels
Dust and water collect in channels and along edges. A quick wipe prevents staining and keeps seals in good condition.
Check hinges and closers
Open and close doors and look for sagging or a changed gap. Floor springs and hinges can be re-adjusted if caught early.
Do not lean heavy loads
Glass shelves and partitions have rated limits. Keep loads within them and avoid leaning heavy items against panels.
Protect against impact
Keep trolleys, furniture and equipment clear of glass edges, as toughened glass can fail suddenly if an edge is struck.
Re-seal when needed
Silicone ages and discolours over several years. Our home maintenance and handyman teams can renew it in a single visit.
AREAS WE COVER
Glass Installation Across Dubai
We survey, fabricate and install glass in Dubai across every major community, from waterfront apartments to gated villa estates and commercial districts.
Villa Communities
- Emirates Hills
- Palm Jumeirah
- Dubai Hills Estate
- Al Barari
- Arabian Ranches
- Arabian Ranches 2 & 3
- Jumeirah Golf Estates
- District One
- Tilal Al Ghaf
- DAMAC Hills
- DAMAC Hills 2
- The Villa
- Mudon
- Villanova
- The Springs
- The Meadows
- The Lakes
Waterfront & Central
- Dubai Marina
- Jumeirah Lakes Towers (JLT)
- Downtown Dubai
- Business Bay
- Emaar Beachfront
- Bluewaters Island
- Dubai Creek Harbour
- City Walk
- Sobha Hartland
- Meydan
- Nad Al Sheba
- MBR City
- JBR
- Pearl Jumeirah
- Dubai Harbour
- The Greens & The Views
- Al Jaddaf
All Neighbourhoods
- Jumeirah 1, 2 & 3
- Al Wasl
- Umm Suqeim
- Al Safa
- Al Barsha
- Barsha Heights
- Jumeirah Park
- Jumeirah Islands
- JVC
- JVT
- Al Furjan
- Discovery Gardens
- Victory Heights
- Motor City
- Dubai Sports City
- Town Square
- Remraam
- Serena
- Mirdif
- Al Khawaneej
- The Sustainable City
- Dubai South
- The Valley
- The Oasis
- Dubai Islands
- Green Community
FAQS
Glass Installation Services: Frequently Asked Questions
Glass installation in Dubai typically costs from about AED 150 for a glass shelf and AED 250 for a small mirror, from AED 1,800 for a glass door, and roughly AED 450–900 per square metre for toughened glass partitions in 10–12mm glass. Large custom or laminated projects are quoted from drawings after a free site survey.
We offer glass partitions, frameless partitions, glass doors, frameless doors, tempered and laminated glass installation, custom mirrors, decorative glass and mirror walls, glass shelves, display cabinets and custom glass works, plus a dedicated range of shower glass and bathroom enclosures.
Tempered (toughened) glass is heat-treated to be about four to five times stronger than ordinary glass and breaks into small blunt pieces. Laminated glass bonds layers with an interlayer so it holds together when cracked. Tempered suits most doors and partitions; laminated suits overhead and security uses.
Custom glass works are glass items made to your exact drawings instead of standard sizes: shaped panels, cut-outs, special finishes, bent or decorative glass and one-off designs. They are surveyed, drawn for approval, then fabricated to order, usually in toughened or laminated glass.
10mm toughened glass is the best all-round choice for standard frameless partitions and doors. Use 12mm for tall or wide panels, heavy frameless doors and entrances, and 8mm for shelves, smaller partitions and framed doors.
No. Toughened glass cannot be cut, drilled or trimmed once it has been heat-treated, so every dimension, hole and notch is confirmed on an approved drawing before fabrication. That is why we measure after finishes are complete.
Most glass projects take 7 to 21 days from first visit to handover. That includes a same-day survey, a quotation within 24–48 hours, 5–10 working days of fabrication and toughening, and 1–3 days of installation, with longer lead times for laminated, bent or highly custom glass.
Low-iron glass is worth it where clarity and colour accuracy matter, such as feature partitions, display cabinets and shelves. It removes the green tint visible at the edge of standard glass and typically adds 20–30 percent to the glass cost.
Yes. We install office glass partitions, meeting-room glazing, entrance doors, retail display glass and mirror walls for offices, shops and hotels across Dubai, working around your schedule and agreeing out-of-hours access with building management where needed.
Yes. Toughened and laminated glass cannot be repaired once damaged, so we template the opening, make matching replacement glass and refit it, checking the hardware and frame at the same time. Removal of the damaged glass is quoted separately.
SS304 stainless steel is fine for most inland properties. For apartments and villas near the sea, such as Palm Jumeirah, Dubai Marina, JBR and Bluewaters, we recommend marine-grade SS316 hardware, which resists corrosion from salt-laden air far better.
FREE SITE SURVEY
Ready to Plan Your Glass Installation?
Send us a photo and rough dimensions on WhatsApp and we will book a free site survey, usually within 48 hours. Planning a wider refit? Our home renovation team can coordinate the glass with every other trade, and our shower glass team handles bathrooms.