Door Wrapping Dubai

Door wrapping is the process of bonding self-adhesive architectural vinyl film over an existing door face to change its colour and finish without replacing the door. Most interior doors are wrapped while still on their hinges, and a single door is typically finished within a few hours.

Professional door wrapping in Dubai generally costs between AED 600 and AED 1,300 per door, with flat interior doors at the lower end and panelled or main entrance doors using UV-stable exterior film at the higher end. A full apartment with five to seven interior doors runs roughly AED 3,000 to AED 9,000.

Only after checking for a certification plate, usually on the door edge near the top hinge. If a door is fire-rated, we either work around the certification area in a way that keeps the rating intact and documented, or advise against wrapping that specific door, since compromising a fire door’s rating is a genuine safety and compliance issue in a shared building.

A single interior door is typically wrapped in a few hours, most often without removing it from its hinges. A full apartment with five to seven doors is usually completed within one working day. Film reaches full adhesion after about 24 hours.

Yes, using UV-stable, weather-rated exterior film rather than standard interior film, since a main door faces direct sun and weather exposure that interior film is not built for. Existing hardware such as intercoms, smart locks and access control is worked around during the wrap and reinstalled correctly afterward.

Compared to replacement, yes, significantly: AED 600 to AED 1,300 for a wrapped door against AED 900 or more for a new one supplied and fitted. Compared to professional painting, wrapping typically costs somewhat more per door, but it is faster with no drying time, the door is usable the same day, and it offers finishes such as wood grain and stone-effect that painting cannot replicate.

Yes, but panelled and moulded doors take longer than flat flush doors, since the film has to be worked into every groove and raised detail rather than stretched flat across the surface. This should be reflected in the quote; a price that doesn’t account for it is often cutting corners on that step.

It can, if not done correctly, which is why we check for a certification plate on every door before quoting. Wrapping over or interfering with a fire door’s rated core, edges or intumescent seals can invalidate its certification. We either work around the certified area appropriately or recommend against wrapping that door.

A professionally wrapped interior door typically holds up for five to eight years with normal use. Handle and edge areas see the most contact and are the first place any early wear would show. Main entrance doors in direct sun should use UV-stable film to reach a comparable lifespan.

Yes, with written approval from the landlord or building management first, since it changes a fixed fitting. Wrapping is fully reversible, which usually makes approval more straightforward than a request to replace the doors outright.

Yes, frames and architraves can be wrapped to match the door face for a seamless, factory-finished look, usually priced as an add-on to the door itself rather than a separate job.

Yes, this is one of the most common requests we get. Wrapping every interior door in a home to a single consistent finish in one visit is often more cost-effective per door than wrapping individually, and gives a more cohesive result than doors updated piecemeal over time.