Wooden Doors Dubai

A custom door is manufactured from scratch to your exact opening and finish specification. Door wrapping refinishes an existing, structurally sound door in place with a new vinyl film, usually within a few hours. Our Door Wrapping page covers that faster, lower-cost refinishing option.

We specify and install genuinely certified fire-rated doors sourced from accredited manufacturers, since fire rating is a tested, accredited product attribute confirmed by laboratory certification, not something achieved by general carpentry construction alone. We won’t claim a fire rating we can’t back with genuine test documentation.

Cost depends on wood species, panel complexity, size and hardware, so a single figure would be misleading. Paint-grade MDF costs considerably less than solid teak or oak, and a flat flush door costs less than a detailed panelled or glazed design. Send your opening dimensions on WhatsApp for an indicative bracket.

Total project time is typically two to three weeks: a same-day quote after measuring the opening, one to two weeks for manufacturing, and two to four hours for installation of a typical interior door.

Kiln-dried solid timber such as teak or oak, or an engineered core with a real wood veneer, resist the warping and swelling that poorly dried or improperly specified timber shows under Dubai’s constant air conditioning and humidity fluctuation. Ask specifically about drying process and core construction.

Yes. Existing hardware is measured and accounted for at the design stage so the finished door works around it cleanly, and any smart hardware is reinstalled and tested as part of the installation.

Solid wood doors are genuine timber through the panel, offering the most authentic weight and grain. Engineered core doors use a stable manufactured core with a real wood veneer face, offering better dimensional stability at a lower cost, since solid timber is more prone to movement across a large panel.

Yes. Custom doors can be manufactured for arched openings, oversized main entrances or other architecturally unusual shapes that standard ready-made doors don’t accommodate.

Yes. If some doors in a home are being replaced while others stay, we can match wood species and finish so the new doors read as part of one consistent set rather than a visible mismatch.

A custom door is manufactured to your exact opening dimensions and chosen finish. A standard ready-made door comes in fixed sizes and finishes; it works well when your opening matches a standard size, but needs trimming or shimming otherwise, which can compromise fit and appearance.

Workmanship and hardware are covered against manufacturing and installation defects. Specific warranty terms are confirmed in writing as part of your quote before manufacturing begins.