CUSTOM GLASS WORKS · DUBAI
Custom Glass Works in Dubai
Made-to-order glass drawn, cut, shaped and finished to your design: kitchen splashbacks, tabletops, bent and printed glass, canopies, balustrades and one-off pieces. Templated on site and installed by a Dubai fit-out team.
Toughened and laminated safety glass · Bent, printed and etched finishes · SS304 and marine-grade SS316 hardware · Free site survey across Dubai
Home › Services › Glass Installation & Custom Glass Works › Custom Glass Works
OVERVIEW
Glass Made Exactly to Your Design
Custom glass works in Dubai are for the jobs that standard glass cannot do: a kitchen splashback cut around sockets and a hob, a dining tabletop with a shaped edge, a curved balustrade, a printed panel carrying your design, or a canopy over an entrance. Vision Three designs, templates, fabricates and installs custom glass for villas, apartments, offices, restaurants and retail spaces across Dubai, made to your drawings and finished to a standard you can see and feel.
Custom glass is unforgiving in one way and flexible in another. Once toughened, laminated or bent, a piece cannot be trimmed, drilled or reshaped, so every dimension, hole and corner has to be correct before fabrication. In return, almost any shape, finish or size can be made. We survey on site, make a template where walls or fixings are irregular, and issue a dimensioned drawing for your approval, so what arrives is exactly what you agreed.
We have renovated and fitted out interiors in Dubai since 2008, so custom glass is coordinated with the tiling, joinery, lighting and structure around it. This page explains the custom glass we make, the right glass type for each, real AED price ranges, mistakes to avoid and how a project runs. It sits within our wider glass installation and custom glass works range, and for bathrooms see our shower glass enclosures.
Surveyed and templated
We measure with a laser and make a physical template where walls, corners or fixings are out of true.
Drawn for your approval
You approve a dimensioned drawing of every piece before any glass is cut, drilled or toughened.
Right glass for the use
Toughened, laminated, heat-resistant or back-painted glass is chosen by use and safety need.
One team, one itemised quote
Survey, drawings, fabrication, installation and sealing on a single written quotation with no extras on the day.
CUSTOM GLASS WORKS
Custom Glass Works We Make and Install in Dubai
These are the six kinds of custom glass we are asked for most often, and what each is best at.
Glass Kitchen Splashbacks
Back-painted or printed toughened glass cut around sockets, hobs and corners, in any colour, for a seamless, easy-clean wall.
Glass Tabletops & Counters
Toughened glass dining, coffee, console and reception tops with polished, bevelled or shaped edges, in clear or low-iron glass.
Bent & Curved Glass
Glass bent in the furnace to a fixed radius for curved partitions, cabinets, counters and feature walls.
Printed, Etched & Sandblasted Glass
Digital ceramic printing, acid-etching and sandblasting for logos, patterns, privacy and branding.
Glass Balustrades & Canopies
Laminated toughened glass for stair and balcony balustrades and entrance canopies, specified to the load and fixing.
Replacement & Made-to-Template Glass
Matching glass for doors, windows, cabinets and furniture, made from a template or a damaged original.
Looking for standard-size glass?
For ready-made layouts, see our glass partition installation, glass shelves and display cabinets pages. For feature finishes, see decorative glass and mirror walls and custom mirrors. For bathrooms, see our shower glass enclosures.
WHY VISION THREE
Why Dubai Clients Trust Us With Custom Glass
We template, not guess
Where walls, corners or fixings are out of true we make a physical template, so the glass fits the real opening.
Drawings before glass
You approve a dimensioned drawing of every piece, because custom glass cannot be changed once made.
Specification by use
Heat-resistant glass behind a hob, laminated glass overhead, toughened glass for tabletops: chosen by use.
Fabrication and fitting in one team
The same team that makes your glass installs it, so there is one point of responsibility.
A fit-out team behind the glass
We coordinate custom glass with kitchen renovation, carpentry and MEP works so every trade lines up.
Plain-English quotations
Glass, shaping, thickness, finish, hardware and installation are itemised, so you can compare quotes like for like.
HOW IT WORKS
Our 5-Step Custom Glass Process
1
Brief & Site Survey
We discuss the design, use and budget, measure with a laser level and photograph the space. Irregular openings are templated.
2
Drawing & Written Quote
You choose glass type, thickness, edge, finish and hardware. We issue a dimensioned drawing and an itemised quotation, usually within 24 to 72 hours.
3
Fabrication
Glass is cut, edge-worked, drilled, notched, printed, etched, bent, toughened or laminated to the approved drawing. Typically 7 to 15 working days, longer for bent glass.
4
Installation
We fix brackets, channels and hardware, set the glass, level and align each piece and check every joint, edge and fixing.
5
Seal, Test & Handover
Joints are sealed, glass is cleaned and every piece checked. We show you the cleaning routine and care limits.
SPECIFICATION GUIDE
Which Glass for Which Custom Job?
Each custom job needs a different glass. The guide below is our usual starting point, and we confirm every choice on site. Our pages on tempered glass installation and laminated glass installation go further into each type.
| Custom item | Usual glass | Typical thickness | Key point |
|---|---|---|---|
| Kitchen splashback | Back-painted toughened (heat-resistant) | 6mm to 8mm | Cut-outs for sockets and hob made before toughening |
| Dining or coffee tabletop | Toughened, clear or low-iron | 10mm to 12mm | Polished or bevelled edge; support points confirmed |
| Curved partition or counter | Bent toughened or bent laminated | 8mm to 12mm | Fixed radius; longer lead time; cannot be altered |
| Printed or etched panel | Toughened with ceramic print, or etched | 6mm to 12mm | Artwork approved on a proof before printing |
| Balustrade or canopy | Laminated toughened | From about 17.5mm | Thickness and fixing confirmed against load and building rules |
| Replacement glass | Matched to the original | As original | Templated from the opening or the old piece |
← Swipe to see full table →
Balustrades, canopies and any overhead or load-bearing glass should be specified by a qualified engineer or confirmed against your building’s own rules. We work with your consultant or building management and never guess a structural thickness.
EDGES, FINISHES & HARDWARE
Edge Work, Finishes and Hardware for Custom Glass
Edges, finish and fixing are what make custom glass look finished. These are the six decisions we help you make on every project.
Flat polished edge
A clean, sharp-looking edge with a polished face. The standard for modern tabletops, shelves and splashbacks.
Bevelled and pencil edges
A bevel adds a classic angled highlight; a pencil edge gives a soft, rounded finish.
Back-painted glass
Glass painted on the back in any colour, usually toughened where it sits behind heat, for seamless, wipe-clean walls.
Digital printing
Ceramic prints fused into the glass for logos, patterns and images, in single or double-sided layouts.
Etched and sandblasted
Frosted designs for privacy, branding and decoration, from simple frosted bands to detailed patterns.
Fixings and hardware
Spigots, standoffs, clamps and brackets in SS304 or marine-grade SS316, finished to match your scheme.
Glass weighs about 2.5kg per square metre for every millimetre of thickness, so a 12mm tabletop of 1.8m by 0.9m weighs around 49kg. Supports, legs and fixings must be rated for the load before the glass is ordered. We specify SS304 stainless steel as standard and marine-grade SS316 for coastal properties on Palm Jumeirah, Dubai Marina, JBR, Emaar Beachfront and Bluewaters Island, where salt-laden air can pit lower-grade fittings. Low-iron glass removes the green edge tint and typically adds 20 to 30 percent to the glass cost.
WHERE WE WORK
Custom Glass for Villas, Apartments, Restaurants and Retail
Villas
Curved glass, tabletops, splashbacks and balustrades for living areas, kitchens and staircases in Emirates Hills, Palm Jumeirah and Dubai Hills Estate, often within a villa renovation.
Apartments
Splashbacks, tabletops and feature glass that lift compact spaces in Downtown, JLT, Business Bay and Dubai Marina. See our apartment renovation work.
Restaurants & hospitality
Printed and etched glass, counters, bar tops and screens for restaurants, cafes and hotel interiors.
Offices & retail
Branded printed glass, reception counters, display tops and feature panels for offices and shops.
PROBLEMS WE SOLVE
Common Custom Glass Problems in Dubai Properties
Glass that does not fit
Ordered from rough measurements or before finishes. We re-template and re-make the glass to the real opening.
Cracked tops and splashbacks
Heat, impact or stress at a cut-out. We replace with correctly specified glass and check the supports and edges.
Splashback colour mismatch
Colour not approved on a sample. We re-make from an approved colour sample under your actual lighting.
Chipped or damaged edges
Impact on an unprotected edge. Edges cannot be repaired on toughened glass, so we make and fit replacement glass.
Wobbling or loose glass
Wrong or worn fixings. We re-fix with correct hardware and add supports where the load needs them.
Faded or damaged prints
Poor-quality film or vinyl prints. We replace with ceramic-printed or etched glass that lasts.
COST GUIDE 2026
How Much Do Custom Glass Works Cost in Dubai?
Supplied and installed, custom glass works in Dubai typically cost from about AED 400 for a small glass tabletop and AED 900 for a kitchen splashback, up to AED 9,000 or more for larger printed, etched or shaped pieces, and AED 9,000 to AED 40,000 or more for bent glass, balustrades and canopies. Because every piece is different, custom glass is quoted from a survey and drawing, not from a price list.
Price follows six things: the glass area in square metres, the type and thickness, the amount of shaping, drilling and cut-outs, the finish (back-painted, printed, etched or low-iron), the hardware and fixings, and the access and installation difficulty. Laminated and bent glass cost more than flat toughened glass of the same size.
Our quotes include survey, drawings, templating, fabrication, delivery, installation and sealing. Removal of existing glass is quoted separately, and structural or engineering input for balustrades and canopies is itemised.
ESSENTIAL
AED 400 – 2,500
Tabletops, small splashbacks, cut-to-size replacement glass and simple polished or bevelled pieces in 6–12mm glass.
SIGNATURE
AED 2,500 – 9,000
Large splashbacks, printed or etched panels, low-iron tabletops and small canopies with quality fixings and a precise finish.
BESPOKE
AED 9,000 – 40,000+
Bent or curved glass, laminated balustrades, large canopies and one-off statement pieces with premium hardware.
Add-ons: bevelled or shaped edge +AED 50–300 · low-iron upgrade +20–30% · back-painted colour +AED 150–400 per sqm · digital printing quoted per artwork · premium hardware finish +AED 300–900. Indicative 2026 prices, supplied and installed; your exact figure follows a free site survey and drawing.
TIMELINE
How Long Do Custom Glass Works Take?
Same day
SURVEY
2–3 days
DRAWING & QUOTE
7–15 days
FABRICATION
1–2 days
INSTALLATION
24 hrs
SILICONE CURE
From first visit to finished glass typically takes 2 to 4 weeks for flat custom glass, and 4 to 6 weeks for bent or heavily printed glass. If the glass is part of a renovation, we book the final measure for after finishes are complete so panels arrive when the space is ready.
COMPARE
Custom Glass vs Standard-Size Glass
What is the difference between custom and standard-size glass? Standard glass is made in common sizes and adjusted on site, while custom glass is templated and made to your exact opening, shape or design. Choose custom when the space is irregular, the glass must carry a design or finish, or a standard size does not exist. For standard layouts see our glass partition and glass shelf pages.
| Feature | Standard-size glass | Custom glass works |
|---|---|---|
| Fit | Common sizes, adjusted on site | Made to your exact opening |
| Shapes | Straight rectangles | Curved, shaped, cut-out and bent options |
| Finishes | Clear, low-iron, frosted | Back-painted, printed, etched, tinted and more |
| Process | Survey, then make | Survey, template, drawing approval, then make |
| Lead time | 7–14 days | 2–6 weeks |
| Best for | Regular openings | Irregular spaces and design-led projects |
| Indicative price (AED) | 150–8,000 | 400–40,000+ |
← Swipe to see full comparison →
AVOID COSTLY ERRORS
6 Custom Glass Mistakes We See in Dubai
1. Approving glass without a drawing. Every dimension, hole, corner and edge must be on an approved drawing, because custom glass cannot be changed once made.
2. Using ordinary glass behind a hob. Splashbacks behind cooking should be heat-resistant toughened glass. Ordinary glass can crack from heat.
3. Not approving the colour in place. Back-painted and printed colours change with lighting. Approve a sample in the actual room, not on a screen.
4. Under-supporting tabletops. A large glass top needs correctly rated supports. Check legs, bases and spacing before the glass is ordered.
5. Guessing balustrade or canopy thickness. Overhead and load-bearing glass must be specified to the load and fixings by an engineer or building rules, never by guesswork.
6. Ordering before finishes are done. Tiling, joinery and paint change the opening. Glass ordered early often cannot be used and cannot be altered once toughened.
QUICK CHECKLIST
✓ Site survey and photos completed
✓ Template taken for irregular openings
✓ Dimensioned drawing approved before fabrication
✓ Colour or artwork approved on a sample or proof
✓ Glass type matched to use (heat-resistant, laminated)
✓ Supports and fixings rated for the weight
✓ Structural glass confirmed by an engineer
✓ Safety mark visible on every piece
✓ Finishes complete before the final measure
✓ Cleaning and care routine explained
AFTERCARE
Keeping Custom Glass Clear and Long-Lasting
Clean with a soft cloth
Use a microfibre cloth and a mild non-abrasive glass cleaner. Avoid scrapers and harsh chemicals.
Protect the edges
Toughened glass can fail suddenly if an edge is struck. Keep furniture, trolleys and equipment clear of edges.
Use pads under heavy items
Felt or rubber pads under heavy decor on tabletops and counters spread the load and prevent scratches.
Keep splashbacks clear of harsh cleaners
Use gentle cleaners on back-painted glass and avoid abrasive pads that can mark the surface.
Check fixings yearly
Look for loose brackets, spigots or clamps and tighten gently by hand. Call us if a piece moves.
Re-seal when needed
Silicone ages and discolours over several years. Our home maintenance and handyman teams can renew it in a single visit.
AREAS WE COVER
Custom Glass Works Across Dubai
We survey, fabricate and install custom glass works in Dubai across every major community, from waterfront apartments to gated villa estates and commercial districts.
Villa Communities
- Emirates Hills
- Palm Jumeirah
- Dubai Hills Estate
- Al Barari
- Arabian Ranches
- Arabian Ranches 2 & 3
- Jumeirah Golf Estates
- District One
- Tilal Al Ghaf
- DAMAC Hills
- DAMAC Hills 2
- The Villa
- Mudon
- Villanova
- The Springs
- The Meadows
- The Lakes
Waterfront & Central
- Dubai Marina
- Jumeirah Lakes Towers (JLT)
- Downtown Dubai
- Business Bay
- Emaar Beachfront
- Bluewaters Island
- Dubai Creek Harbour
- City Walk
- Sobha Hartland
- Meydan
- Nad Al Sheba
- MBR City
- JBR
- Pearl Jumeirah
- Dubai Harbour
- The Greens & The Views
- Al Jaddaf
All Neighbourhoods
- Jumeirah 1, 2 & 3
- Al Wasl
- Umm Suqeim
- Al Safa
- Al Barsha
- Barsha Heights
- Jumeirah Park
- Jumeirah Islands
- JVC
- JVT
- Al Furjan
- Discovery Gardens
- Victory Heights
- Motor City
- Dubai Sports City
- Town Square
- Remraam
- Serena
- Mirdif
- Al Khawaneej
- The Sustainable City
- Dubai South
- The Valley
- The Oasis
- Dubai Islands
- Green Community
FAQS
Custom Glass Works: Frequently Asked Questions
Custom glass works in Dubai typically cost from about AED 400 for a small tabletop and AED 900 for a kitchen splashback, up to AED 9,000 for larger printed or shaped pieces, and AED 9,000–40,000+ for bent glass, balustrades and canopies. Every piece is quoted from a survey and drawing.
Custom glass works are glass items made to your exact drawings instead of standard sizes, such as splashbacks, tabletops, curved glass, printed or etched panels, balustrades, canopies and replacement glass. They are surveyed, drawn for approval, then fabricated to order.
Kitchen splashbacks use back-painted toughened glass, usually 6mm to 8mm, because toughened glass resists the heat behind a hob. Sockets and hob cut-outs are made before toughening, and the colour is approved on a sample before painting.
Yes. We make toughened glass dining, coffee, console and reception tops, usually 10mm to 12mm, with polished, bevelled or shaped edges, in clear or low-iron glass. The supports and legs are confirmed first so they carry the weight safely.
Yes. Bent toughened or laminated glass is made in the furnace to a fixed radius for curved partitions, counters and cabinets. Because it cannot be altered once made, the radius and size are approved on a drawing, and lead time is usually 4 to 6 weeks.
Yes. We use digital ceramic printing and acid-etching or sandblasting for logos, patterns and privacy designs. Artwork is approved on a proof before production, and ceramic print is far more durable than film or vinyl.
Balustrades and canopies normally use laminated toughened glass, from about 17.5mm, so the glass stays in place if cracked. The exact thickness and fixing depend on the load and building rules, and are confirmed by an engineer or your building management.
No. Toughened, laminated and bent glass cannot be cut, drilled or reshaped once made, so every hole, notch and corner is confirmed on an approved drawing before fabrication.
Flat custom glass typically takes 2 to 4 weeks from survey to installation, including 7 to 15 working days of fabrication. Bent or heavily printed glass takes 4 to 6 weeks, because it has longer production and lead times.
Yes. We template the opening or the damaged piece and make matching replacement glass, then refit it and check the hardware and frame at the same time. Removal of the damaged glass is quoted separately.
SS304 stainless steel is fine for most inland properties. For apartments and villas near the sea, such as Palm Jumeirah, Dubai Marina, JBR and Bluewaters, we recommend marine-grade SS316 hardware, which resists corrosion from salt-laden air far better.
FREE SITE SURVEY
Ready to Make Your Custom Glass?
Send us a photo, a sketch or a drawing and rough dimensions on WhatsApp and we will book a free site survey, usually within 48 hours. Planning a wider project? Our home renovation team can coordinate the glass with every other trade, and you can see our full range on our glass installation page.